Close Window

View this e-mail in your Browser.
Profiling Solutions by Datapaq
Datapaq, Inc News Products Services Downloads nav bar to home page Contact us

FAQ's:
If you're looking for advice or have a specific question regarding your Datapaq equipment, look no further. Datapaq's frequently asked questions are dedicated to help processors get the most from their production lines. We hope you find this informative and useful in optimizing your processes.

Q. How long will my Lithium batteries last for my TPAQ 21?
A. The life of Lithium batteries depends on the length of your kiln cycle ... Read_more

Q. How far can radio telemetry work?
A. In an "open field", radio telemetry can work up to 650 ft. When transmitting from inside a kiln, the transmission signal is reduced from the layers of insulation, brick and steel ... Read more

Q. On the graph, my kiln starts well before the probes entered the kiln. Can I adjust this?
A. Yes. With your cursor on the graph area, right click and select "Adjust kiln Start" ... Read more

Q. Is it possible to export the information to Excel? How do I do that?
A. Yes. Place your cursor over the graph area and right click. Select "Copy" from the menu and a window comes up asking what information you want to copy (i.e. Raw Data (by data point), a picture of the graph, etc)... Read more


If you have any specific questions you would like personally answered, please contact us at 978-988-9000 or email kiln@datapaq.com.



  • Question:
    How far can radio telemetry work?

    Answer:
    In an "open field", radio telemetry can work up to 650 ft. When transmitting from inside a kiln, the transmission signal is reduced from the layers of insulation, brick and steel. For this reason, Datapaq’s telemetry system utilizes high quality transmitting and receiving antennas. In large applications we can connect multiple antennas to ensure the signal is received clearly throughout the process.
    back to the top

  • Question:
    On the graph, my kiln starts well before the probes entered the kiln. Can I adjust this?

    Answer:
    Yes. With your cursor on the graph area, right click and select "Adjust kiln Start". You can then grab the first zone of the graph and move it right or left to line up the profile to the kiln.
    back to the top



Kiln Tracker System
Kiln Tracker System



Kiln Tracker System with Telemetry